Rockwell Automation 22C Serial Flash Kit - Manual (Page 3)

3
6. With all power removed from the drive,
attach the 10-pin connector on the DSI cable
to port J2 on the drive control board.
You are now ready to flash
update the drive firmware.
Flash The Drive
1. Obtain the latest DSI Drive Flash Tool (DSI_DriveFlash.exe) and Flash Update File (*.mot) by connecting to:
www.ab.com/support/abdrives.
• Under Support Options, click on Web Updates.
• Follow the links for your drive product to download the flash tool and desired flash update file.
2. Power up the drive and verify that the Green LED on the Flash Module lights.
3. Double click DSI_DriveFlash.exe file to run the DSI Drive Flash Tool.
• Review and accept the licence agreement.
4. From the DSI Drive Flash Tool’s main window:
• Click Browse and select the desired flash
update file.
• Select the correct serial communications port.
• Select the desired baud rate. The default baud
rate is 57600. If problems occur during the
flash routine, this rate can be reduced.
5. To begin the Flash Update routine, click the
Flash Update button.
6. When programming is complete, Exit the DSI
Drive Flash Tool.
J2