Rockwell Automation TDO16AIN 16-Channel Digital Output Termination Card Introducted Power 24Vdc - Manual (Page 2)

2 TDO16AIN October 2005 – Issue 6
Triguard SC300E
SPECIFICATION
Model TDO16AIN
Power supply inputs Has four separate connectors (FS1, FS2, FS3
and FS4) for dc power supplies. The four
positive supplies feed individual sections of
the digital outputs via common buses. The
buses are linked together. For lightly loaded
applications (e.g. 6A) all the required power
can be supplied via one connector. For highly
loaded applications (e.g. 16A) use multiple
power connectors.
No. of digital input channels 16
Nominal field supply voltage 24Vdc
Maximum field supply voltage 33Vdc
Maximum field supply current 9A for each of the four input connectors (do
not exceed 16A total)
Fuse in each positive line to field 1A, fast acting, indicating
Chassis cable connector 34 way DIN41612
Field cable connector Screw terminal to suit 2.5mm 2 wire (16 AWG)
Fuse blown indication Local: Fuse blown LED (one per card)
Remote: Fuse blown alarm output (PL1) – can
be connected to Fuse blown LED on Power
Distribution Panel (PDD24).
Safety ground terminal TS1 M3 threaded bush provision for a ring terminal.
Allows the common 0V supply bus to be
grounded via a 10k ohm resistor. Prevents the
channels from floating if the card is
disconnected from the chassis.
Instrument 0V terminal TS2 M3 threaded bush provision for a ring terminal.
Allows the field 0V to be commoned for
transient suppression protection.
Overall size (mm)
Overall size (inches) 162L x 125W x 107H
6.4L x 4.9W x 4.2H
Weight 0.37kg