Rockwell Automation TDO16AIN 16-Channel Digital Output Termination Card Introducted Power 24Vdc - Manual (Page 9)

TDO16AIN October 2005 – Issue 6 9
Triguard SC300E TDO16AIN 16-Channel D/O Termination Card 24Vdc
SUPPLEMENTARY INFORMATION
Dummy loads
Dummy loads are only to be connected to outputs that are not used. Do not connect a
dummy load in parallel with a real output.
Digital output channel connections
Table 2-2 lists the digital output channel wiring connections and associated fuses for connector
J1 and the screw terminals.
Pin J1-1a is connected to the -ve bus (Figure 2-4 ).
J1 pins, other than J1-1a and those listed in Table 2-2, are not connected.
Screw Terminal DIN41612 Connector J1
Channel
Digital
output
si g n al t o
field
device Field loop
return
from field
device Field loop
fused
ac/dc
supply to
chassis Digital
output
signal from
chassis
Fuse
Link
position
for
dummy
load
1 1(+) 1(-) J1-2a J1-2c F1 JP1-IN
2 2(+) 2(-) J1-4a J1-4c F2 JP2-IN
3 3(+) 3(-) J1-6a J1-6c F3 JP3-IN
4 4(+) 4(-) J1-8a J1-8c F4 JP4-IN
5 5(+) 5(-) J1-10a J1-10c F5 JP5-IN
6 6(+) 6(-) J1-12a J1-12c F6 JP6-IN
7 7(+) 7(-) J1-14a J1-14c F7 JP7-IN
8 8(+) 8(-) J1-16a J1-16c F8 JP8-IN
9 9(L) 9(-) J1-18a J1-18c F9 JP9-IN
10 10(L) 10(-) J1-20a J1-20c F10 JP10-IN
11 11(L) 11(-) J1-22a J1-22c F11 JP11-IN
12 12(L) 12(-) J1-24a J1-24c F12 JP12-IN
13 13(L) 13(-) J1-26a J1-26c F13 JP13-IN
14 14(+) 14(-) J1-28a J1-28c F14 JP14-IN
15 15(+) 15(-) J1-30a J1-30c F15 JP15-IN
16 16(+) 16(-) J1-32a J1-32c F16 JP16-IN