Rockwell Automation MD60 OIM Quick Reference User Manual
Page 3
MD60 / MD65 OIM Quick Reference
3
Key Descriptions
Table 1 – Key Descriptions
Key
Description
Exit a menu, cancel a change to a parameter value, or
acknowledge a fault or alarm.
Select a digit, select a bit, or select a menu tab.
Scroll through options, increase a value, or toggle a bit.
Used to increase Speed Reference on MD1CC
Process Display screen.
1
1
Speed Reference increase and decrease keys are operational only when the OIM is
the MDI Master. See OIM parameter 10 - (M/S Status) to view the OIM’s active
device type.
Scroll through options, decrease a value, or toggle a
bit.
Used to decrease Speed Reference on MD1CC
Process Display screen.
1
Enter a menu, enter edit mode in a parameter screen,
or save a change to a parameter value.
Access the function associated with a programming
key:
• ALT-DISP toggles between the Process Display and
Large Format Display.
• ALT-LANG selects language used (when available).
• ALT-REMOVE allows the OIM to be disconnected
without causing a fault.
Start the drive.
Stop the drive or clear a fault.
Change direction.
Jog the drive.
Type parameter numbers and values. (Available only
with MD1CC.)
Speed Reference increase and decrease.
1
(Available
only with MD4LCD-PNL and MD4ALCD.)
Esc
Esc
ESC
PROG
SEL
SEL
or
or
ALT
JOG
JOG
...
0
9
.
+/-
+/-
DEL