Rockwell Automation 20D PowerFlex 700S/700H Frame 10...14 Drives Maintenance Stand - Manual (Page 5)

5
Publication PFLEX-IN014B-EN-P
Step 3: Assemble the
Bottom of the Stand
Task Description
Insert the bottom (outer) legs into the base.
Secure the bottom legs to the base using the M8 x 60 Phillips head screws and
washers as shown.
Proper tightening torque is 7 N•m (62 lb•in).
Insert the upper (inner) legs into the bottom legs.
Secure the upper legs to the bottom legs using the locking pins.
A
B
C
D
A
A
B
B
C
C
D
D
Upper Leg
Upper Leg
Lower Leg
Lower Leg
Base
Locking Pin