Rockwell Automation 20D PowerFlex 700S/700H Frame 10...14 Drives Maintenance Stand - Manual (Page 8)

Publication PFLEX-IN014B-EN-P
8
Step 6: Attach the Stand to
the Drive
Task Description
Align the rails of the stand with the rails of the drive and the holes in the mounting
plates with the holes in the frame of the drive cabinet.
Install and tighten the M5 x 16 slot-hex head screws to secure the mounting plates
to the frame of the drive cabinet.
Proper tightening torque is 4 N•m (35 lb•in).
Note: The number of screws in each mounting plate varies with drive frame size.
A
B
B
Frame 13 Shown
Maintenance
Stand Rail
Mounting Plate
Cabinet Frame
Drive Rail