Rockwell Automation T3832 ICS Regent Historian Package for Winterpret - Manual

ICS Regent
®
PD-6042
Industrial Control Services 1
Historian Package for W
INTERPRET
Sequence of Events and Process Historian
Function Blocks
(T3832)
Issue 1, March, 06
The Historian package for W INTERPRET is an add-in software
package which allows the user to create Sequence of Events
and Process Historian function blocks for Regent application
programs. When installed on the PC, the historian package is
seamlessly integrated with the base W
INTERPRET software.
Sequence of Events function blocks are used to record time
stamped process events which can be any discrete input or
output point or any shared or system control relay of a Regent
system. Process Historian function blocks are used to record
the values of analog inputs or other word type data at defined
sampling intervals.
For both types of function blocks the recorded information is
saved in the Regent’s memory and retrieved by using
W
INTERPRET to monitor and collect the recorded information.
The retrieved information is saved to the disk in the form of
ASCII log files which can be printed for detailed analysis of
critical process operations.
Software Installation
The Historian package is installed on the PC running the
W
INTERPRET application software. The W INTERPRET base
package provides the necessary installation software to install
this add-in historian package. The historian package should
be installed at the same time or after you have installed the
W
INTERPRET base package.