AJA IoXT - Manual (Page 24)

Io XT v10.4 www.aja.com 24
When the installer has completed copying the AJA Windows Software to disk, you will
see a standard Windows Logo test warning. Click on the “Continue Anyway” button to
finish the installation.
When the installation is completed, a final screen will be displayed announcing that
“Setup has finished installing AJA Windows Software on your computer.” Click on the
Finish button after the installation is complete. Restart the computer after installation to
activate the Io XT.
Re-Installation &
Repair
If you have problems running your newly installed plugins or need to re-install for added
applications, you can relaunch the install package and access the following window.
NOTE: Always uninstall AJA Windows Software before installing a new version.
Figure 20. Change, Repair, or Remove Installation Menu
Genlock and Your System
For video stability and proper system operation, you can genlock all equipment to house
sync, however genlock is not required for Io XT due to excellent freerun accuracy. To
connect genlock, use a black burst generator output looped through the system. On the
Io XT house sync is connected to “LTC/Ref In”.
NOTE: Be sure to set the Reference/LTC connection to Reference in the AJA Control Panel.