AJA IoXT - Manual (Page 29)

Io XT v10.4 www.aja.com 29
Control Panel Screens: The side area of the Io XT Control Panel provides different information categorized by
topics. Clicking on a topic—or a block diagram element—displays an information screen
corresponding to that topic. Screens that can be selected are:
Control: configures Io XT operation and output timing.
Format: select the framebuffer primary video format and any secondary formats for
conversion of inputs/outputs
Input Select: view and edit input selections and how they are mapped
SDI Out: select output format
HDMI: configure the HDMI I/O
Analog Out: configure the component/composite analog output
Video Setup: configures Video such as composite black level.
Audio Setup: configures Audio options such as analog audio monitor level.
Conversion: (available for Mac only) for applications that support selection of codec
options such as whether paused video appears as a full frame or a single field (jitter
shown or not shown) and 24 to 30 fps padding patterns, RGB range, and Stereo 3D
signal configuration (if applicable).
DS Keyer: setup and control the insertion of keyed video from the frame buffer or
graphics files with alpha channel.
Presets: add or delete saved preset configurations (handy for setting up the Io XT for
certain workflows and then saving it as a canned configuration for easy later recall)
Firmware: enables installation of AJA card firmware.
Info: displays status information and firmware version # of the Io XT and how it is
installed in the host Macintosh. This information is generally intended for
troubleshooting/support.