Autocue WinCue Pro News ADR 2006 - Manual (Page 5)

WinCue Pro News ADR Interface User Guide Set-Up • • • • 5
1.1 ADR Set-Up
The Active Data Receiver Interface has been produced for clients that have
developed their own newsroom system and need to connect to a WinCue
prompter.
WinCue can communicate with the third-party newsroom via Serial, TCP/IP, or
SPX connection.
As the newsroom system that WinCue will be connecting to is specific to the
client site the Active Data Receiver (ADR) interface set-up is completely reliant
on the settings of the newsroom system, WinCue is configured to match its
settings.
Before moving onto the next section of this User Guide make sure that you take
note of the configuration settings of your newsroom system.