Autocue WinCue Pro News ADR 2006 - Manual (Page 33)

WinCue Pro News ADR Interface User Guide Opening ADR Scripts in WinCue • • • • 33
If Panic Mode is enabled the WinCue machine will stop trying to receive
updates from ADR, as soon as Panic Mode is disabled the WinCue machine will
re-start trying to receive updates from ADR.
Note: Any changes to the Runorder and stories on WinCuePro while in 'Panic
Mode' will be lost as soon as 'Panic Mode' is disabled
3.2.1 Enabling/Disabling Panic Mode
Click on the Panic Mode icon on the tool bar at the top of the screen to toggle
Panic Mode. When the button is shown as pressed in Panic Mode is enabled,
otherwise it is disabled:
Panic Mode disabled:
Panic Mode enabled:
While in Panic Mode:
The Runorder can be changed on WinCue in the same way that it is changed
on ADR (i.e. dragging and dropping stories with the mouse).
To Delete/drop a story, left-click (select) the story and then press the Delete
key, the story will then be moved to the Trash Can at the bottom of the screen
(stories can be dragged back out of the Trash Can).
To Insert a New story, right-click below the placement for the new story.
A drop-down menu will then appear, select New, then Single-column Script.
You will be asked for the name/title of the new story, type it in and select the
OK button.
Double-click on a story to view it and edit it. The editor works in the similar way
as the NEXUS editor, but stories do not have to be saved.