Autocue WinCue Pro News ADR 2006 - Manual (Page 32)

WinCue Pro News ADR Interface User Guide Opening ADR Scripts in WinCue • • • • 32
If the Runorder that you wish to load (for prompting) is not listed in this box
ensure that the Runorder has been dumped from the ADR machine.
To open an ADR Runorder on WinCuePro ready for prompting, do either of the
following:
Double left-click on the Runorder that you want to open.
Or
Left-click (select) the Runorder you want to open and then click on the 'OK'
button.
A Scanning ADR Folder dialog box will appear showing you WinCue's progress
in connecting to the ADR Queues selected.
The Runorder will then be opened and be set ready to start prompting.
3.2 Panic Mode
WinCuePro has a Panic Mode option that allows ADR Runorders and stories to
be manipulated from WinCuePro if the ADR system stops working for any
reason such as a network failure.
IMPORTANT: The 'Panic Mode' feature should only be used as a last resort.