2 quick configuration – Autocue WinCue Pro News ADR 2006 User Manual
Page 28
WinCue Pro News ADR Interface User Guide
Configuration •
•
•
•
28
2.2
Quick Configuration
The following instructions have been provided to assist those who need to set-
up their ADR connection quickly
1. Click on the Tools menu; select Options, then News Interfaces, and then
Active Data Receiver.
2. From the ADR options first menu (General) select Preview Mode.
3. Then select the Profiles tab and select Add, give the Profile a name, e.g.
test, do not change any other settings at this time. Click on ok
4. Click on the Port Configurations tab and select Add
5. Type in a name, e.g. COM1, and then fill in the Com port settings that your
news interface will use to transmit its serial data.
6. Go to the profile pull down menu (bottom right) and select the profile
created in step 3, click OK.
7. Come out of the Options window, click on the File menu, and select Start-
Receiving Download. You should now see all the sent text in the ADR
window, if nothing appears re-check your settings or try restarting WinCue.