Autocue QMaster Complex - Manual (Page 69)

QMaster Comple Language-UserGuide.docx 2012-10-02
69
© 2003-2011 Autocue Group Ltd.
Select files to be prompted
1. Press the F2 button on the keyboard connected to the QBox to open the QBox On Screen
Display menu. Alternatively, you can also press F1 to access the Select Data Source
menu.
117. Select Load Runorder.
If no keyboard is attached, use the appropriate button on a connected scroll controller.
118. Select the FTP server option from the list in the Select Data Source menu.
119. Select the required runorder folder name.
120. Press Enter and the scripts will be copied to the QBox. If you created folders to store
scripts for different runorders, select the required runorder name and press Enter.
If any previous files were being prompted while you loaded new files onto the QBox, the
new files will automatically start to be prompted using the same settings.
The link to the internal FTP server is dynamic. If you add new script files to the runorder
folder currently being prompted, they will automatically be inserted into the runorder in
the position determined by their filename and any modified files that already exist will
be replaced, even if they are on screen.