Autocue QMaster Complex - Manual (Page 7)

QMaster Comple Language-UserGuide.docx 2012-10-02
7
© 2003-2011 Autocue Group Ltd.
3. Press Enter and then use the arrow keys to highlight the lan0 Wired Network Connection
and then press Enter.
4. Use the left and right keyboard arrow keys to select the IPv4 Settings tab.
5. Press the Tab key to highlight the Manual Configuration option and press the spacebar to
select it if is not already.
6. Use the Tab key to highlight the IP Address field.
7. Enter the chosen IP address. Press the full stop/dot key to move to the next block of the
IP address.
IP addresses of the computer and QBox should be in the same range. For example, if the
address of the computer is 192.168.50.5 you might assign 192.168.50.10 to the QBox.
As long as the first three blocks of numbers are the same, the two devices will be able to
communicate.