Baumfolder BAUM20: Control Panel - Manual (Page 11)

TP10386 © Page 11 of 12
the or Buttons directly UNDER the 2 digit display until
the desired delay number is displayed.
EXAMPLE:
This is set-up for 10 pieces in a Batch with a 1.5 second
delay between Batches.
3. To return back to RUN mode, Press Button and set either the
Batch Size or Time Delay to Zero and the Folder will run continuously.
STOP FEED
In Batch Count Mode, you also can have the Feeder Set-Up for a Stop Feed
Count. You can enter the number of Sheets that you wish to Feed and the
Feeder will Feed that number and STOP. The feeder will not Re-Start until you
Press SHEET START Button.
1. Press the Button on the Control Panel, the 3 display functions on
the Control Panel will appear.
A. In the first 3 digits of the 8 digit display enter the Number of
Sheets that you wish the Feeder to Feed by Pressing either
or Buttons.
B. In the Last 2 digits of the 8 digit display, Press and HOLD
the Button until the LETTERS appears – the
machine will now Feed only the Number of Sheets that you
have entered.
EXAMPLE:
With this setting the Feeder will run 10 sheets