Baumfolder BAUM20: Control Panel - Manual (Page 8)

TP10386 © Page 8 of 12
EXAMPLE: Hold the MINUS Button, this will automatically count
back to P00 (group P0). Now by Pressing the Button
will take you to the next Parameter Group P10 – P20 - P30 –
P40 – P50 – P60
2. Pressing and directly UNDER the left 3 digits of the Large 8
digit
display, this will select the individual Parameters in a select group.
EXAMPLE: Start with the first Group of Parameters, the 3 digit
display reads P00. Pressing the this will take you to
Parameters P01 – P02 – P03 – P04 – P05
- To go to the next Group of Parameters Press
The display will show P10. Pressing the button
will take you to Parameters P11 – P12 –P13 – P14 (continue
this sequence to move thru the rest
of the Parameter Groups P20 – P30 – P40 – P50 – P60
3. To change one of the machines Parameter Settings Press or
Buttons UNDER the right most 2 digits of the large 8 digit display.
The following is a list of the available parameters. Please see the Operators
Manual for a definition of each parameter.