Baumfolder BaumCut 31.5 (For serials 76N1101 thru 78N1000) - Manual (Page 13)

K1 - 5
1 2 3 4 5 6 7 8 9
C 0
x D i
PROGRAMMABLE
Energy lead wire
Front side (Operating side)
Power Supply
1.0 Technical Data/Machine Layout/Transport and Installation of the Machine/Safety Relevant Machine Elements
The machine is to be connected by an authorized electrician, only!
Connect machine according to diagram!
• When the system is operated with residual current breaker, use a residu-
al current breaker ( > 30 mA ) for each machine!
• All the cables marked with a symbol, as well as any cables with
orange sheath are still alive even if the main switch has been shut off.
Energy supply is made from the rear of the machine.
Power supply is located within the connection box; access via front guard.