Baumfolder BaumCut 31.5 (For serials 76N1101 thru 78N1000) - Manual (Page 34)

K4 - 6
1 2 3 4 5 6 7 8 9
C 0
x D i
PROGRAMMABLE
4.0 Manual Operation
Clamping with False Clamp Plate
The clamp plate avoids clamping marks on sensitive stock.
Attaching false clamp plate:
Push plate against clamp from underneath until you hear guide pins (6.1)snap.
Removing of false clamp plate:
1. Lower clamp with pedal approx. 2" above table and fix it in this position.
2. Press two screw drivers simultaneously into the drillings (6.2) in the clamp.
False clamp plate is dropped!
6.2
6.1
Air Table
The table surface of the machine is equiped with air jets. After turning on the air
supply, the stock can be moved easily.
Turning the air on: Press left cut button (4a)
Turning the air off: Press right cut button (4b)
4a
4b