Technical data – Baumfolder BaumCut 31.5 (For serials 76N1101 thru 78N1000) User Manual
Page 19
K1 - 11
1.0 Technical Data/Machine Layout/Transport and Installation of the Machine/Safety Relevant Machine Elements
Technical Data
Cutting width
80 cm / 31,5"
Clamp opening
10 cm / 3,93"
Feed depth
80 cm / 31,5
Power requirement (main motor):
3 phase
4,2 kW / 5,4 H.P.
Net weight
900 kg / 1983 lbs
Width
155 cm / 61"
Length
197 cm / 77,5"
Height
155 cm / 61"
Front table length
67 cm / 26,4"
Table height
90 cm / 35,4"
Clamp pressure, min.
200 daN / 440 lbs
max.
2700 daN / 5950 lbs
Knife thickness
11,75 mm / 0,4"
Grinding reserve, max.
2,5 cm / 1"
Smallest cut
without false clamp, min.
1,5 cm / 0,6"
with false clamp, min.
5 cm / 1,96"
Backgauge speed
0 - 13 cm/sek.
Knife speed/min.
20
Voltage supply (3 phase) 200 - 240, 50/60Hz
Fusing
3 x 20A
Attention!
The wire cross section of the main power supply according to the countrys
regulations.
Same regulations according the plug connectors.
Noise emission
Metering of noise level according to DIN EN 13023, LpA (dB):
76,5 with 300 cuts/hour (manual feeding)
79,5 with 600 cuts/hour (manual feeding)
Extraneous and room noise correction has been carried out.
daN = kp