Technical data – Baumfolder BaumCut 31.5 (For serials 700N101 thru current) User Manual
Page 18
K1 - 10
1.0 Technical Data/Machine Layout/Transport and Installation of the Machine/Safety Relevant Machine Elements
Technical Data
Cutting width
80 cm / 31,5"
Clamp opening
10 cm / 3,93"
Feed depth
80 cm / 31,5
Power requirement (main motor):
3 phase
4,2 kW / 5,4 H.P.
Net weight
900 kg / 1983 lbs
Width
155 cm / 61"
Length
197 cm / 77,5"
Height
155 cm / 61"
Front table length
67 cm / 26,4"
Table height
90 cm / 35,4"
Clamp pressure, min.
200 daN / 440 lbs
max.
2700 daN / 5950 lbs
Knife thickness
11,75 mm / 0,4"
Grinding reserve, max
.
2,5 cm / 1"
Smallest cut
without false clamp, min.
2 cm / 0,8"
with false clamp, min.
5 cm / 1,96"
Backgauge speed
0 - 13 cm/sek.
Knife speed/min
.
20
Voltage supply (3 phase) 200 - 240, 50/60Hz
Fusing
3 x 20A
Attention!
The wire cross section of the main power supply according to the coun-
trys regulations.
Same regulations according the plug connectors.
Noise emission
76,5 dB (A) T with 300 cuts/hour (manual feeding)
79,5 dB (A) T with 600 cuts/hour (manual feeding)
Extraneous and room noise correction has been carried out.
daN = kp