Block programming – Baumfolder BaumCut 31.5 (For serials 700N101 thru current) User Manual
Page 72
Advertising
K5B - 14
Block Programming
5.0 Automatic Operation
Example: Variation 3, selection : Four trim cut with labels
1.
Select
"Four trim cut with labels"
2.
Menu:
1 Orig. sheet size
2 Sheet size tables
With this menu it is able to enter the original sheet size manually or to select a
sheet size from a sheet size table.
3.
e.g.: Enter Orig. sheet size
4.
Enter Original sheet size X, confirm with key
5.
Enter Original sheet size Y, confirm with key
or
6.
e.g.: Sheet size tables
7-
Select desired sheet size by means of the cursor keys and confirm with
key
Confirm the sheet orientation or turn sheet orientation (observe paper grain)
Menu:
1 Sheet orientation OK
2 Turn sheet
8.
e.g.: Sheet orientation OK:
will be continued on next page
Four trim cut
with labels
Advertising