Baumfolder BaumCut 31.5 (For serials 700N101 thru current) User Manual
Page 96
K8 - 2
HYDRAULIC
We recommend to have oil changed and unit checked by
BAUM and/or authorized personnel.
Attention when bleeding hot oil - danger of burning!
Oil change:
approx. every 6000 hrs.
Fill in oil up to middle of oil level indicator!
Quantity (liters): 28
A
B
C
GUIDINGS FOR KNIFE AND CLAMP (grease lubrication)
Lubrication by grease gun!
1.
Move backgauge to position 42 cm (16,5 inches)!
2.
Remove lid (C) at backgauge drive guard
3.
Grease spindle via lubricating nipple
2 - 3 strokes with the grease gun are sufficient.
Lubrication intervals: monthly
Lubrication by grease gun!
1.
Lubricate guidings for knife bar (A) from the front side:
2 lubricating nipples at the front plate
2.
Lubricate clamp guidings from the rear side (B):
2 lubricating nipples
2 - 3 strokes with the grease gun are sufficient.
Lubrication intervals: weekly
BACKGAUGE DRIVE (grease lubrication)
Usable oil brands (DIN 51524, in alphabetical order):
1.
ARAL Vitam GF 46
2.
AGIP Oso 46
3.
BP Energol HLP-HM 46
4.
CASTROL Hyspin AWS 46
5.
DEA Astron HLP 46
6.
ESSO Nuto H 46
7.
ELF Elfolna 46
8.
FINA Hydran AF 46
9.
FUCHS Renolin B, rot
10. KLÜBER Lamora HLP 46
11. MOBIL DTE 25
12. OPTIMOL Hydo 46 or Hydo MV 32
13. SHELL Tellus C 46
14. TOTAL Azolla ZS 467
Usable grease brands (DIN 51825, in alphabetical order):
1.
ARAL Radlagerfett
2.
AGIP Autol Top 2000 or
Longtime Grease 2
3.
BP Energrease LS 2
4.
DEA Paragon EP 2
5.
ESSO Unirex N2 or
Essonorva 275
6.
FINA Pluton AX 2
7.
KLÜBER Centoplex 2 EP
8.
MOBIL Mobilgrease XHP 222
9.
OPTIMOL Longtime PD 2
10. SHELL Retinax LX 2
11. TOTAL Multis EP 2