Maintenance cut counter – Baumfolder BaumCut 31.5 (For serials 700N101 thru current) User Manual
Page 64
Advertising
![background image](/manuals/583098/64/background.png)
K5B - 6
5.0 Automatic Operation
Operation: Shows maintenance intervals.
Has been set to 100.000 cuts by manufacturer.
Counter starts at "0" or other preset amount and counts upward. After reaching
100.000, at every start-up, the operation display will read
OBSERVE MAINTENANCE SCHEDULE
Select maintenance cut counter
Set counter:
1.
Enter number of cuts via keyboard
2.
Press key
"Enter"
< automatic change of image back to selection image >
Maintenance Cut Counter
Advertising