Baumfolder Flexifold: Turbo Wheel Upgrade Kit Installation - Manual (Page 2)

These instructions cover the installation of the new Baum Turbo Wheel Up-Grade Kit for
existing Baum 714XLT Air Feed Table Top Folders and Baum Flexifold Automated
Table Top Folders in the field.
This kit consists of a new Baum Turbo Suction Wheel complete with bearings and a
detailed instruction manual on how to install it.
You will need a 2.5 mm hex key and a 3 mm hex key to do this up-grade.
1) The first thing you need to do is to
disconnect the air and suction hose
from the feed table and remove the
feed table from the folder.
.
2) Loosen the set screw which locks
the front blow tube in place using a
2.5 mm hex key.
3) Slide the front blow tube out of the
caliper body and move it out of the
way.
4) Locate the (6) 4mm flat head screws
securing the feed wheel drive
assembly to the feed table.
5) Remove the screws using a 2.5 mm
hex wrench and set them aside as
you will need these later.