Baumfolder Flexifold: Turbo Wheel Upgrade Kit Installation User Manual
Page 3
Advertising
6) Carefully lift up the Feed Table and
set the feed table aside. The Feeder
Drive Assembly will remain on the
table.
7) Remove the (4) 4mm soc hd cap
screws holding the plate for the
vacuum manifold assembly in
place using a 3 mm hex wrench.
8) Separate the vacuum adapter from
the old feed wheel.
9) Slide the old sucker wheel off the
shaft.
10) Slide the new sucker wheel on the
shaft
Advertising
This manual is related to the following products: