Oc (octave), Pb (pedal bend), 2ce (2x2 chorus) – Boss Audio Systems GS-10 User Manual

Page 45: Feedback, Level, Direct level, Range, Octave level, Pitch min, Pitch max

Advertising
background image

45

Chapter 4 Introduction to Effects and Parameters

Section 4

* When set to BPM, the value of each parameter will be set

according to the value of the Master BPM (p. 54) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the time to
twice or four times the time length of the BPM when the set
time is increased).
When setting to BPM, press PARAMETER [

] to display

the Master BPM settings screen.

Feedback

This adjusts the feedback amount of the pitch shift sound.

Level

Adjusts the volume.

Direct Level

This adjusts the volume of the direct sound.

OC (Octave)

This adds a note one octave lower, creating a richer sound.

Parameter

Value

Range

Range 1–Range 4

Octave Level

0–100

Direct Level

0–100

Range

This selects the pitch range for the input sound to which you
want to add the effects.

The range to which the affect is applied changes with the
Input Select (p. 19) value.

Octave Level

This adjusts the volume of the sound one octave below.

Direct Level

Adjusts the volume of the direct sound.

PB (Pedal Bend)

This lets you use the pedal to get a pitch bend effect.
The expression pedal automatically switches to the pedal
bend function when PB is selected.

“Setting the External Expression Pedal Functions (Expression
Pedal Function)” (p. 58).

Parameter

Value

Pitch Min

-24–+24

Pitch Max

-24–+24

Pdl Position

0–100

Effect Level

0–100

Direct Level

0–100

Pitch Min

This sets the pitch at the point where the expression pedal is
fully lifted.

Pitch Max

This sets the pitch at the point where the expression pedal is
all the way down.

Pdl Position (Pedal Position)

This adjusts the pedal position for pedal bend.

Effect Level

This adjusts the volume of the pitch bend sound.

Direct Level

Adjusts the volume of the direct sound.

2CE (2x2 Chorus)

Two separate stereo chorus units are used for the low-
frequency and high-frequency ranges in order to create a
more natural chorus sound.

Parameter

Value

Xover f

100 Hz–4.00 kHz

Lo Rate

0–100, BPM

–BPM

Lo Depth

0–100

Lo PreDly

0.0 msec–40.0 msec

Lo Level

0–100

Hi Rate

0–100, BPM

–BPM

Hi Depth

0–100

Hi PreDly

0.0 msec–40.0 msec

Hi Level

0–100

Input
Select

Guitar
Microphone
USB (Gtr/Mic)
AUX

Bass
USB

Range 1

7th string, open (B) to
1st string, 24th fret (E)

Low B, open (B) to
High C, 24th fret (C)

Range 2

7th string, open (B) to
1st string, 12th fret (E)

Low B, open (B) to 1st
string, 19th fret (C)

Range 3

7th string, open (B) to
1st string, open (E)

Low B, open (B) to 1st
string, 9th fret (E)

Range 4

7th string, open (B) to
4th string, 2nd fret (E)

Low B, open (B) to 2nd
string, 2nd fret (E)

Advertising