Boss Audio Systems GS-10 - Manual (Page 90)

90
Appendices
●MIDI Machine Control (MMC)
F0H 7FH 7FH 06H com F7H
F0H = System Exclusive
7FH = ID Number (Universal Realtime Message)
7FH = Device ID (Broadcast)
06H = Sub ID#1(Machine Control Command)
com = Sub ID#2(MMC Command)
F7H = EOX (End of Exclusive/System common)
* “com” (MMC Command) that I transmit with GS-10 is following.
01H Stop
02H Play
44H 06H 01H 00H 00H 00H 00H 00H RESET
06H REC
3. EXCLUSICE COMMUNICATION
On the GS-10, exclusive messages can be used as follows. - Transmit/receive GS-10 system/
patch data.
The model ID for GS-10 exclusive messages is 00H 63H, and you can set up the device ID at
00H–1FH.
■ONE WAY COMMUNICATION
●Request Data 1 RQ1(11H)
F0H 41H dev 00H 63H 11H aaH bbH ccH ddH ssH ttH uuH vvH sum F7H
F0H = Exclusive Status
41H = Manufacturer ID (Roland)
dev = Device ID (Dev=00H-1FH)
00H = Model ID MSB (GS-10)
63H = Model ID LSB (GS-10)
11H = Command ID (RQ1)
aaH = Address MSB
bbH = Address :
ccH = Address :
ddH = Address LSB
ssH = Size MSB
ttH = Size :
uuH = Size :
vvH = Size LSB
sum = Checksum
F7H = EOX (End of System Exclusive)
* This message can only be received, and is not transmitted from the GS-10.
* When transmitting large Size values spanning fragmented addresses, the data can be
transmitted only to those addresses that are contiguous.
●Data Set 1
DT1(12H)
F0H 41H dev 00H 63H 12H aaH bbH ccH ddH eeH ... ffH sum F7H
F0H = Exclusive Status
41H = Manufacturer ID (Roland)
dev = Device ID (dev = 00H-1FH)
00H = Model ID MSB (GS-10)
63H = Model ID LSB (GS-10)
12H = Command ID (DT1)
aaH = Address MSB
bbH = Address :
ccH = Address :
ddH = Address LSB
eeH = Data
: = :
ffH = Data
sum = Checksum
F7H = EOX (End of System Exclusive)
* When transmitting large amounts of data spanning fragmented addresses, the data can
be transmitted only to those addresses that are contiguous.
●Inquiry Message
❍Identity Request
F0H 7EH 10H 06H 01H F7H
F0H = Exclusive Status
7EH = ID Number
10H = Device ID
06H = Sub ID#1
01H = Sub ID#2
F7H = EOX (End of System Exclusive)
* The 7FH (Broadcast) device ID is also supported.
* When an Identity Request is received, the GS-10 will transmitted the following Identity
Reply.
❍Identity Reply
F0H 7EH 10H 06H 02H 41H 63H 01H 00H 00H 00H 00H 00H 00H F7H
F0H= Exclusive Status
7EH= ID Number (Universal Non-realtime Message)
10H= Device ID
06H= Sub ID#1
02H= Sub ID#2
41H= ID Number (Roland)
63H 01H= Device Family Code
00H 00H= Device Family Number Code
00H 00H 00H 00H= Software Revision Level
F7H=
EOX (End of System Exclusive)
* When an Identity Request is received, the GS-10 will transmitted the following Identity
Reply.
4. PARAMETER ADDRESS MAP
The address and size are displayed under 7-bit hexadecimal notation.
Address MSB LSB
Binary 0aaa aaaa 0bbb bbbb 0ccc cccc 0ddd dddd
7-bit Hexadecimal AA BB CC DD
Size MSB LSB
Binary 0sss ssss 0ttt tttt 0uuu uuuu 0vvv vvvv
7-bit Hexadecimal SS TT UU VV