Rfi cold air intake – Bully Dog 54200 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 13

Advertising
background image

12

RFI COLD AIR INTAKE

2. Secure the RFI enclosure base into the engine bay with

stock bolt A (step 6, page 7) and a 10 mm socket.

3. Connect the Stage 2 RFI tube to the RFI MAF tube and

throttle body with the couplers.

• Leave the band clamps loose.

4. Install the 16 mm hoses.

a. Insert a barb connector into each CCV tube.

b. Slide the other end of each 16 mm tube over one of the

nozzles on the Stage 2 RFI tube.

c. Move the spring clamps back into place. (Use pliers.)

Advertising
See also other documents in the category Bully Dog For the car: