Bully Dog 54200 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 6)

5
RFI COLD AIR INTAKE
Installation
Installation is
very simple, and
can be separated
into three parts:
Removing the
Stock Intake,
Preparing the
RFI Intake and
Installing the RFI
Intake. The complete installation of the RFI Cold Air Intake
system should take about 20 minutes. The assembly diagram
shows how the parts of the intake fit together in sequence.
Removing the Stock Intake
1. IMPORTANT: Before beginning installation, disconnect
your battery at the negative terminal.
Failure to disconnect the battery
could result in personal injury and/or
damage to your vehicle.
OEM Intake Lid
CCV Tubes (9)
Band Clamp (4)
Engine Cover (8)
Intake Tube (10)
Mass Air Flow Sensor (2)