Bully Dog 54200 Rapid Flow Induction (RFI) Cold Air Intake User Manual
Page 2
1
RFI COLD AIR INTAKE
Introduction
This manual provides step-by-step installation instructions for
the Bully Dog Rapid Flow Induction (RFI) Cold Air Intake for
2004 and newer 5.6L Nissan Titan trucks and Armada SUVs.
Installation requires a few basic tools and takes about 20
minutes.
Table of Contents
Parts .....................................................................1-4
Installation ............................................................5-14
Maintenance ........................................................15-16
Parts Included
RFI Lid ..................................................................(
54100-1
)
RFI Base ...............................................................(
54100-2
)
RFI MAF Tube ......................................................(
54100-3
)
Stage 2 RFI Tube .................................................(
54200-3
)
Silicone Coupler – Straight ..................................(
54200-5
)
Silicone Coupler – Hump .....................................(
54200-7
)
Silicone Hose (2) ..................................................(
54200-6
)
Air Filter with Band Clamp ...................................(
54100-5
)
4” Worm Drive Band Clamp (4) ............................(
51105-7
)
#8 Hose Clamp (4) ...............................................(
10800-4
)
16 mm Barb Connector (2) ..................................(
54200-94
)
Black Oxide Phillips Screw (2) ..............................(
54100-94
)
Tools Needed
• Flat-head screwdriver
• Phillips screwdriver
• 10 mm socket
• Bit driver
• Pliers