Bully Dog 53108 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 8)

13 14
RFI COLD AIR INTAKE RFI COLD AIR INTAKE
5. Reconnect the MAF and temperature sensor plug and
the battery. Start the vehicle, listen for leaks and check all
connections. Go for a ride and enjoy!
3. Install the air filter by connecting it to the air intake tube
inside the enclosure and tightening the band clamp with a
flat-head screwdriver.
4. Install the RFI enclosure lid. Make sure that the lid is
properly aligned. Snap the four latches over the mounts on
the lid, firmly securing it to the enclosure base.