Bully Dog 81411 Rapid Flow - Manual (Page 6)

5
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81411
QUICk OVERVIEw FULL EXHAUST
Muffler
Straight Pipe
(2 Pieces)
Tail Pipe Tip
Front Piece Tail Pipe
Adaptor
Catalytic Converter
(Stock)
CLAMP AND HANGER PLACEMENT
Hanger A
Hanger D
Clamps
Hanger C
Clamp
Clamp
Hanger B
In these steps you will install the rapid Flow Exhaust System. Bully Dog’s Exhaust Systems are one-
cut systems, meaning that you should only have to cut one pipe or less if installed correctly.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
tool s needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM