Bully Dog 81411 Rapid Flow - Manual (Page 8)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81411
6. Hang the Front Piece Tail Pipe from Hangers B and
C. Ensure that the bend of the Front Piece Tail Pipe
is directly over the axle.
7. Install the Tail Pipe Tip by tightening up Hanger C
enough to hold the Tail Pipe Tip in place.
8. Install the Muffler by connecting it into the Front
Piece Tail Pipe and then tightening Hanger C. En-
sure that the levers are pushing towards the front
of the vehicle.
Hanger D
Hanger C
Front Piece Tail Pipe
Front Piece Tail Pipe
Install Front Piece Tail Pipe
Install Tail Pipe Tip
Hanger C
Tail Pipe Tip
Front Piece Tail Pipe
Muffler
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk