Bully Dog 81411 Rapid Flow User Manual
Page 7
Advertising
6
6
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81411
2. Place all of the supplied Hangers into their appro-
priate locations as shown in the above diagram.
Hanger A will hold the Straight Pipe. Hanger B
will serve as both a hanger and a clamp at the
rear of the Muffler. Hanger C will also serve as
both a hanger and a clamp between the Front
Piece Tail Pipe and the Tail Pipe Tip.
Hang the Hangers
3. Install the Adapter on the Catalytic Converter and secure with one of the supplied Clamps.
Advertising