Bully Dog 81410 Rapid Flow - Manual (Page 6)

5
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81410
QUICk OVERVIEw FULL EXHAUST
Muffler
Straight Pipe
(2 Pieces)
CLAMP AND HANGER PLACEMENT
Hanger A
Hanger B
Hanger D
Down Pipe
Clamp
Clamps
Hanger C
Tail Pipe Tip
Second Piece Down Pipe
Front Piece Tail Pipe
Clamp
Clamp
In these steps you will install the Rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
Tool s Needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
Tape Measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM
Adapter