Bully Dog 81410 Rapid Flow User Manual
Page 8
Advertising
7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81410
6. Reinstall the Catalytic Converter and secure it by
bolting it to the flange on the Second Piece Down
Pipe .
7. Install the Adapter on the Catalytic Converter and
secure with one of the supplied Clamps.
8. Hang the Front Piece Tail Pipe from Hangers C and
D. Ensure that the bend of the Front Piece Tail Pipe
is directly over the axle.
9. Install the Tail Pipe Tip by tightening up Hanger D
enough to hold the Tail Pipe Tip in place.
Hanger D
Front Piece Tail Pipe
Tail Pipe Tip
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk
Hanger C
Front Piece Tail Pipe
Install Front Piece Tail Pipe
Install Tail Pipe Tip
Advertising