Bully Dog 81120 Rapid Flow User Manual
Page 5
Advertising
6
6
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81120
ImPoRTaNT: It is illegal in all 50 states and Canada to remove the catalytic converter.
REMOVAL OF STOCk EXHAUST SySTEM
In these steps you will remove the stock ex-
haust system from the catalytic converter
back.
1.Use a sawzall to cut the exhaust immediately behind
the muffler.
2.Then cut the exhaust 4 inches behind the catalytic
converter in front of the band clamp.
3. Remove each piece of the stock exhaust system,
including the stock hangers. To make removing
the Hangers easier, it is recommended that you use
a silicone spray on each of the rubber hangers that
hold the stock exhaust.
#1 Cut Exhaust after muffler
#2 Cut Exhaust
in front of band clamp
#7 Remove necessary exhaust hangers
Advertising