Bully Dog 81120 Rapid Flow - Manual (Page 7)

8
8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81120
2. Install all the Hanger Brackets to make sliding the
hangers into the holders spay a little more of the sili-
con spray.
3. The Hanger Bracket will be secured to the frame of the
truck using an existing hole in the frame.
4.The hole is on the lower part of the frame as shown and
directly across from Hanger C. Tighten with a 9/16”
wrench or socket.
5.At this time we will start from the Y pipe and work
toward the back of the truck.
9/16”
Hanger D
Install the Hangers