Bully Dog 81120 Rapid Flow User Manual
Page 8
9
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81120
6. Install Y Pipe from
Hanger B. The clamp
will connect onto the
upper pipe of the Y
with the lower pipe
directly below.
7. Install the Passenger Front Piece Tail Pipe into the lower
Y Pipe junction. Ensure that the bend is directly over the
axle. Secure the connection with a clamp.
8. Install the Passenger Tail Pipe Tip in the Passenger Front
Piece Tail Pipe and hang from Hanger C. Secure with a
clamp.
9. Install the Driver Front Piece Tail Pipe into the upper Y Pipe
junction. Again ensure that the bend is directly over the
axle. Secure with a clamp. Zip tie brake lines away from
exhaust to prevent excessive heat damage.
10. Install the Driver Tail Pipe Tip in the Driver Front Piece Tail
Pipe and hang from Hanger D Secure the connection
with a clamp.
Hanger C
Tail Pipe Tip
Driver Side Tail Pipe Tip
Hanger C
Passenger Side Tail Pipe Tip
Hanger D
Hanger B
Y-Pipe
9/16”
Install Front Piece Tail Pipe
Install Tail Pipe Tip