Calculated Industries 4067 User Guide - Manual (Page 12)

C
onstruCtion
M
aster
P
lus
eZ
12
1. Clear Calculator:
OOO
2. Start Materials function:
N
3. If necessary, continue pressing N until BLoCKS displays
4. Start Blocks function:
e
5. Enter 18′ Wall Length:
18fe
6. Enter 6′ 6" Wall Height:
6f6ie
7. Accept 8" default value for Block Height:
e
8. Accept 16" default value for Block Length:
e
9 Accept 5% default value for Waste Factor and solve for Blocks:
e nUMBer oF BLoCKS 139.
e CoVeraGe area 117. SQ Feet
drywall
required entries Possible Solutions
Room Length
Room Width
Room Height
Ceiling
• 1. Y (Yes, include)
• 2. N (Don′t include)
Sheet Length
• Default value: 8′
Sheet Width
• Default value: 4′
Number of Sheets - Total
Number of Sheets – Wall
Number of Sheets – Ceiling
Joint Tape Length
Ready-Mix Compound Weight
Number of Drywall Screws
Number of Drywall Nails
Total Wall Area
Total Ceiling Area
Total Drywall Area
optional entries
Waste Factor
• Default value: 5%
Find the amount of Drywall materials needed for a room 30′ long, 25′ wide
and 9′ high. Include the Drywall for the ceiling and use default values for
sheet length, sheet width and waste factor:
1. Clear Calculator:
OOO
2. Go to Materials function:
N
3. If necessary, continue pressing N until drYWaLL displays
4. Start Drywall function:
e
5. Enter 30′ Room Length:
30fe
6. Enter 25′ Room Width:
25fe
7. Enter 9′ Room Height:
9fe
8. Include Drywall for Ceiling:
1e
9. Accept 8′ default value for Sheet Length:
e
10. Accept 4′ default value for Sheet Width:
e
11. Accept 5% default value for Waste Factor and solve for Drywall Materials:
e nUMBer oF SheetS ttL 58.
e nUMBer oF SheetS WaLL 33.
e nUMBer oF SheetS CeiL
25.
e Joint taPe Lnth
731 Feet 0 inCh
e readY-MiX CoMP. LBS.
256.
e drYWaLL SCreW QtY.
2284.
e drYWaLL naiL QtY. 3655.
e totaL WaLL area 990. SQ Feet
e totaL CeiLinG area 750. SQ Feet
e totaL drYWaLL area 1740. SQ Feet
Fencing
required entries Possible Solutions
Fence Length
Number of Horizontal Rails
Maximum Post Spacing
• Default value: 96"
Post Width
• Default value: 3-1/2"
Number of:
• Fence Sections
• Posts
• Rails
Uniform Rail Length
Maximum Rail Length Remainder
Using the default values, calculate Materials needed for a 75′, 3-rail Fence.
1. Clear Calculator:
OOO
2. Go to Materials function:
N
3. If necessary, continue pressing N until FenCinG displays
4. Start Fencing function:
e
5. Enter Fence Length:
75fe
6. Enter Number of Rails:
3e
7. Accept 96" default value for Maximum Post Spacing:
e
8. Accept 3-1/2" default value for Post Width and solve for Fencing:
e FenCe SeCtion QtY.
10.
e FenCe PoSt QtY.
11.
e FenCe raiL QtY.
30.
e UniForM raiL Lnth
7 Feet 2-1/8 inCh
e MaX raiL LenGth reM 0 Feet 2-1/2 inCh
Footings
required entries Possible Solutions
Footing Length
Footing Area
• Default value: 264 sq inches
Waste Factor
• Default value: 5%
Footing Volume
optional entries
Waste Factor
• Default value: 5%
Calculate Footing Volume needed for a Footing 60′ long using a 256 sq. inch
(16"x16") Footing Area.
1. Clear Calculator:
OOO
2. Go to Materials function:
N
3. If necessary, continue pressing N until FootinG displays
4. Enter 60′ Footing Length:
60fe