Calculated Industries 4067 User Guide - Manual (Page 13)

C onstruCtion M aster P lus eZ
13
5. Enter 256 sq. inch default for Footing Area:
256iie
6. Accept 5% default value for Waste Factor and solve for Footing Volume:
e FootinG VoLUMe 4.1481481 CU Yd.
Pavers
required entries Possible Solutions
Coverage Length
Coverage Width
Coverage Area
• Required if Coverage Length
not entered
Paver Length
• Default value: 8"
Paver Width
• Default value: 4"
Number of Pavers
Coverage Area
optional entries
Waste Factor
• Default value: 5%
Using default values, calculate the number of Pavers and coverage area for a
patio 35′ long and 18′ wide.
1. Clear Calculator:
OOO
2. Go to Materials function:
N
3. If necessary, continue pressing N until PaVerS displays
4. Start Pavers function:
e
5. Enter 35′ Coverage Length:
35fe
6. Enter 18′ Coverage Width:
18fe
7. Accept 8" default value for Paver Length:
e
8. Accept 4" default value for Paver Width:
e
9. Accept 5% default value for Waste Factor and solve for Pavers:
e nUMBer oF BriCKS 2977.
e CoVeraGe area 630. SQ Feet
Roofing
required entries Possible Solutions
Building Length
Building Area
Required if Building Length not
entered
Building Width
Nails per Shingle
Default value: 4
Nail Length
Default value: 1-1/4"
Pieces per Bundle
Default value: 21
Bundles per Square
Default value: 3
Roof Area
Number of Squares
Number of Bundles
Nails Required
Nail Weight
Number of 4x8 Sheets
optional entries
Roof Pitch
Waste Factor
Default value: 5%
Using default values, find the Material quantities for a Roof 60′ long,
36′ wide, with an 8" pitch.
1. Clear Calculator:
OOO
2. Start Materials function:
N
3. If necessary, continue pressing N until rooFinG displays
4. Start Roofing function:
e
5. Enter 60′ Building Length:
60fe
6. Enter 36′ Building Width:
36fe
7. Enter 8" Roof Pitch:
8ie
8. Accept 5% default value for Waste Factor:
e
9. Accept 4 default value for Nails per Shingle:
e
10. Accept 1-1/4" default value for Nail Length:
e
11. Accept 21 default value for Pieces per Bundle:
e
12. Accept 3 default value for Bundles per Square and solve for
Roofing Materials:
e rooF area 2595.9969 SQ Feet
e SQUare QUantitY 27.333333
e BUndLe QUantitY
82.
e GaLVaniZed naiLS reQd.
7056.
e naiL WeiGht LBS
33.6
e 4X8 SheathinG QtY.
86.
Studs
required entries Possible Solutions
Wall Length
Number of Corners
Number of Windows
Number of Doors
On-Center Spacing
• Default value: 16″
Number of Studs
optional entries
Waste Factor
• Default value: 5%
Find the number of Studs required for a wall 40′ long with two corners, two win-
dows and one door.
1. Clear Calculator:
OOO
2. Go to Materials function:
N
3. If necessary, continue pressing N until StUdS displays
4. Start Studs:
e
5. Enter 40' Total Wall Length:
40fe
6. Enter 2 Corners:
2e
7. Enter 2 Windows:
2e
8. Enter 1 Door:
1e