Calculated Industries 4067 User Guide - Manual (Page 9)

C onstruCtion M aster P lus eZ
9
8. Accept default 80" Headroom Height:
e
9. Enter 3/4" Upper Flooring Thickness:
3 / 4ie
10. Enter 1-1/4" Lower Flooring Thickness:
1i1 / 4e
11. Enter 1/2" Nosing Length:
1 / 2e
12. Enter 3/4" Riser Thickness and solve for Advanced Stairs:
3 / 4e
net FLoor-to-FLoor riSe 9 Feet 10-1/2 inCh
e nUMBer oF riSerS 16.
e aCtUaL riSer hGht 7-7/16 inCh
e
nUMBer oF
treadS
15.
e aCtUaL tread Wdth 10 inCh
e Min StairWeLL oPen 10 Feet 3-3/16 inCh
e StrinGer LenGth 16 Feet 7-1/8 inCh
e inCLine anGLe 36.52°
e roUGh Stair rUn 12 Feet 6 inCh
e FiniShed Stair rUn 12 Feet 7-1/4 inCh
e toe PoSition 01 1 Feet 0-7/16 inCh
Continued presses of e will show all Toe Positions.
e toe PoSition LaSt
16 Feet 7-1/8 inCh
example using Solve function:
Using default values (including 7-1/2" Target Riser Height), solve for
Advanced Stairs with a 10' 1" Floor-to-Floor Rise and a Stair Run of 15' 5":
1. Clear Calculator:
OOO
2. Start Advanced Stair function:
Cs
3. Enter 10′ 1" Floor-to-Floor Rise:
10f1ie
4. Accept default 7-1/2" Target Riser Height:
e
5. Enter 15′ 5" Stair Run and solve for Advanced Stairs:
15f5iCe
net FLoor-to-FLoor riSe 10 Feet 1 inCh
e nUMBer oF riSerS
16.
e * aCtUaL riSer hGht
7-9/16 inCh
e nUMBer oF treadS
15.
e aCtUaL tread Wdth 12-5/16 inCh
e Min StairWeLL oPen 12 Feet 2-3/4 inCh
e StrinGer LenGth 19 Feet 3-1/2 inCh
e inCLine anGLe 31.52°
e roUGh Stair rUn
15 Feet 5 inCh
e toe PoSition 01
1 Feet 2-7/16 inCh
Continued presses of e will show all Toe Positions.
e toe PoSition LaSt 19 Feet 3-1/2 inCh
*The in the display indicates the Actual Riser Height exceeds the stored
Target Riser Height (Default value: 7-1/2").
CirCular funCTion
required entries Possible Solutions
Enter one of these:
• Diameter
• Radius
• Perimeter
• Area
Column Volume
Column Surface Area
Cone Volume
Cone Surface Area
optional entries
Height
If one value is known – Diameter, Radius, Perimeter or Area – the other
three are calculated and stored. Height is required for Cone and Column
calculations.
The Diameter of a circle is 15 Feet 8 Inches. Find the Radius, Perimeter
and Area:
1. Clear Calculator:
OOO
2. Start Circular function:
c
3. Enter 15′ 8" Diameter and solve for Circular values:
15f8ie
enter radiUS 7 Feet 10 inCh
e enter PeriMeter
49 Feet 2–5/8 inCh
e enter CirCULar area
192.77162 SQ Feet
To solve for Cones and Columns, enter the Height and one other input.
Find Circular, Cone and Column dimensions using a 15′ 8" Diameter
and a 10′ Height:
1. Clear Calculator:
OOO
2. Start Circular function:
c
3. Enter 15′ 8" Diameter:
15f8ie
4. Accept calculated Radius, Perimeter and Area:
eee
5. Enter 10′ Height, solve and scroll through all values:
10fe
CoLUMn VoLUMe 1927.7162 CU YdS
e CoLUMn SUrFaCe area 492.18285 SQ Feet
e Cone VoLUMe 642.57205 CU YdS
e Cone SUrFaCe area 312.605 SQ Feet
raKe wall funCTion
See Diagrams on page 22 ►
required entries Possible Solutions
Two of the first three required:
• Pitch
• Run
• Rise
On-Center Spacing
• Default value:16"
Top Plate Length
Differential Length
Inclination (End) Angle
Various Rake Wall Stud Sizes
optional entries
Base Height
Top Plate Thickness
• Default value: 1-1/2"
Find the Stud lengths for a Rake Wall with an 8" Pitch and 6' Foot Run using
the default 16" Inch On-Center spacing and 1-1/2" Top Plate Thickness:
1. Clear Calculator:
OOO