Calculated Industries 4320 - Manual (Page 5)

P OCKET R EFERENCE G UIDE — 4
Ç c Square Root — Used to
find the Square Root of a
non-dimensional or area
value.
µ Memory Add Key — Adds
the displayed number to the
value stored within the
semi-permanent Memory.
Ç µ Memory Minus —
Subtracts the displayed
value from Memory.
® Recall Key — Recalls val-
ues stored in any register.
® µ displays the value
in Memory.
® ® Memory Display/Clear —
Displays the value in Memory
and clears the register.
Ç ® Memory Clear — Clears
the Memory without chang-
ing the current display.
Dimension Keys
y Yards Key — This is an
entry and conversion key.
The entry can be a whole
number or a decimal num-
ber. Used with the
Ç key
converts any other dis-
played dimensioned num-
ber to Yards.
4320PRG-E-A 6/16/04 7:53 AM Page 4