Calculated Industries 4320 - Manual (Page 8)

P OCKET R EFERENCE G UIDE — 7
Area/Volume Keys
l Length Key — Enters the
value for Length in dimen-
sion problems (e.g., for cal-
culating Area or Volume).
Note: this key is also used to
enter the length for “Square-
Ups.”
Ç l Square-Up — Calculates
the Diagonal, or “Square-
Up,” based on entered
Length and Width.
W Width Key — Enters the
value for Width in dimension
problems (e.g., calculating
Area or Volume).
Note: this key is also used to
enter the width for “Square-Ups.”
Ç W Percent Grade — Used to
enter and/or solve Percent
Grade. Calculates Percent
Grade using entered values
for Width and Depth or
Slope.
d Depth Key — Enters the
value for Depth in dimen-
sion problems. Calculates
Depth from entered values
of Width and Percent
Grade or Slope.
4320PRG-E-A 6/16/04 7:53 AM Page 7