Calculated Industries 4320 - Manual (Page 7)

P OCKET R EFERENCE G UIDE — 6
C Cubic Key — This key is
used with a dimension key
(Feet, Inches, Yards,
Meters, etc.) to identify a
value as being a volume.
Example:
5 C y
S Square Key — This key is
used with a dimension key
(Feet, Inches, Yards,
Meters, etc.) to identify a
value as being an area.
Example:
1 0 S f
m Meter Key — Enters or
converts to
Meters.
M Millimeter Key — Enters or
converts to
Millimeters.
w Weight Key — Enters or
converts (a volume value) to
Tons, Pounds or Kilograms.
Repeated presses will cycle
through these units.
Ç % Weight/Volume — Enters
or converts the
Weight
per Volume setting as
Tons/Yard
3 , Lbs/Yd 3 or
kg/m 3 . Repeated presses
will cycle through these
settings.
4320PRG-E-A 6/16/04 7:53 AM Page 6