Calculated Industries 4095-A Pocket Reference Guide - Manual (Page 10)

Trigonometric Keys
 Finds the sine of a degree or
undimensioned value.

 Arcsine (sin
-1 ) – Gives the angle
degrees for the Sine value.

Finds the Cosine.

 Arccosine (cos -1 ) – Gives the
angle in degrees for the Cosine value.

Finds the Tangent.

 Arctangent (tan -1 ) – Gives the
angle in degrees for the Tangent
value.
Pipefitting Project Keys

Enters or calculates a linear Slope,
Slope Angle or Percent Grade.

 (%Grade) Used to enter or solve
Percent Grade. Calculates Percent
Grade based on entered
Offset and Run or Slope.

Enters, calculates or stores the
Offset (Rise).

Enters or calculates the Run.

Enters or calculates the Travel
(Diagonal).
4095 Inside_Corrected.indd 10 4/27/2009 8:42:57 AM