Calculated Industries 4095-A Pocket Reference Guide User Manual
Page 21
using memory Storage Keys (m1 - m9)
In addition to the standard cumulative memory
(as previously described), your calculator has
nine independent storage registers – M1 through
M9 – that can be used to permanently store sin-
gle, noncumulative values. The following example
shows the use of M1 ( ). To use M2 - M9,
replace the presses of the key with presses of
the corresponding number key ( - ).
You can replace a value in one of these
memory registers by storing a new value in
place of the stored value.
fuNcTIoN
KEySTRoKES
Store single value in M1
clear m1
Recall m1
Example: Store 175 into M1, recall the value,
and then clear the value.
KEySTRoKES
DISPlAy
7
m-1 175.
0.
m-1 175.
m-1 0.
P
ocket
R
efeRence
G
uide
— 23
4095 Inside_Corrected.indd 21
4/27/2009 8:42:58 AM