Calculated Industries 4095-A Pocket Reference Guide - Manual (Page 14)

 (repeats options) fRAc 0 1/16
INch
Second press of  :
(Area displays) AREA Std.

AREA 0.
SQ fEET

AREA 0.
SQ INch

AREA 0.
SQ m
 (repeats options) Std.
Third press of  :
(Volume displays) vol Std.

vol 0.
cu fEET

vol 0.
cu m
 (repeats options) vol Std.
Fourth press of  :
(Meter linear displays) mETR 0.000
m

(floating point) mETR floAt
m

(repeats options) mETR 0.000
m
Fifth press of  :
(Decimal degree displays) DEG 0.00º

(floating point) DEG floAt

(repeats options) DEG 0.00º
Sixth press of  :
(Fractional mode) fRAc Std.

(Lowest denominator) fRAc conSt.
(floating point)

(Repeats options) fRAc Std.
Seventh press of  :
(Mathematical Operation) mATh ordEr
4095 Inside_Corrected.indd 14 4/27/2009 8:42:57 AM