Calculated Industries 4095-B User Guide - Manual (Page 26)

26 —
P
IPE
T
RADES
P
RO
™
CALCULATE COSTS
The Cost function provides the total cost for material, based on
a stored unit cost and an entered quantity of material. This is
convenient for quickly calculating costs on a job that requires
many of the same kind of items.
Example: You are doing an installation that includes 120 feet of
pipe that comes in 10' lengths at $3.21 per 10' pipe.
KEYSTROKE DISPLAY
Store the unit cost of the pipes needed:
 
0.
     
COST PER 3.21
Enter the number required:
  12
Calculate total cost:
  (Cost)
TTL$ 38. 52
You can then quickly calculate costs for a different number of
the same item.
KEYSTROKE DISPLAY
 
0.
  17
  (Cost)
TTL$ 54. 57
You can also find costs of different items on the fly without
overwriting your stored unit cost.
Determine the cost of 17 fittings at $2.89 each:
KEYSTROKE DISPLAY
Enter number of pipes needed:
 
0.
  17
Multiply by the cost:
     2.89
  (Cost)
TTL$ 49. 13